Broadcom Adds High PDE to SiPM Portfolio

The Broadcom® AFBR-S4N33P012M is a monolithic Silicon Photomultiplier (SiPM) array used for ultra-sensitive precision measurements of single photons. This SiPM is based on the NUV-MT technology which combines high photodetection efficiency (PDE) with low dark count rate and low cross-talk. With an SPAD pitch of 18 m and a short recharge time, the HDR (high dynamic range) NUV-MT SiPM provides a high dynamic range.
The active area of 3 x 3 mm2 is sub-segmented into a 2 x 2 matrix of four independent channels. Each sub-channel has an active area of 1.5 x 1.5 mm2.
Larger areas can be covered by tiling multiple AFBR-S4N33P012M SiPMs. The encapsulation for good mechanical stability and robustness is realized by an epoxy clear mold compound, which is highly transparent down to UV wavelengths, resulting in a broad response in the visible light spectrum with high sensitivity towards the blue and near-UV region of the light spectrum. Contact us for your requirements!

WHITE PAPER: Enhancing Drone Autonomy with Broadcom Time-of-Flight Sensors

In the rapidly evolving landscape of unmanned aerial vehicles (UAVs), precision and reliability in spatial awareness are the cornerstones of operational success. Whether navigating the steel canyons of an urban construction site, monitoring crops in vast agricultural fields, or counteracting threats from other UAVs, drones require sensors that can perform under extreme ambient conditions. The Broadcom AFBR-S50 family of time-of-flight (ToF) sensors provides a high-performance, multipixel solution that is designed to meet these challenges. By offering exceptional ambient light suppression (up to 200 klx) and a lightweight, compact form factor (< 1g), the AFBR-S50 series empowers drones with the sight necessary for safe, autonomous flight across all industrial sectors. >White Paper

EMIRS50: The Next-Gen Precision Gas Measurement

With the relaunch of the EMIRS50, Axetris is setting new standards in infrared gas detection. Thanks to innovative technology and a compact design, the EMIRS50 is ideal for applications where speed, precision, and energy efficiency are essential – from medical devices to industrial gas monitoring.

Source: EMIRS50 – The Next-Gen Precision Gas Measurement

Broadcom and MTG to Co-Sponsor Spectrometer Webinar on October 2

Join us and our partner Broadcom for an inside look at how next-generation miniature spectrometers are transforming industrial sensing. From deep UV to NIR, these compact, robust devices deliver laboratory-grade performance in the harshest environments — all in industrialized packages small enough to fit in the palm of your hand. In this webinar, you’ll discover:

  • How Broadcom’s spectrometer platforms integrate seamlessly into OEM systems for a wide variety of applications.
  • The technology behind our fixed grating, no-moving-parts design for unmatched stability and long life.
  • Real-world case studies
  • Customization options that let you tailor wavelength range, optical performance, housing, and interfaces to your exact needs.
  • A sneak peek at our next-generation products — including wavelengths up to 2500 nm and enhanced UV-VIS models.

Whether you need discrete components or turnkey subsystems, you’ll see how Broadcom delivers precision, durability, and flexibility to accelerate your product development. 

WHEN: Thursday October 2, 2025

TIME: 9:00 AM PT/12:00 PM ET

WHERE: Virtual Webinar (Link provided @ sign-up)

WHO SHOULD ATTEND: Product Line Managers, System Architects, R&D Engineers responsible for product roadmaps of Spectrometer Systems

Reserve your spot now and learn how to bring high-performance spectroscopy to any application! Register Now!

SiC Innovations Advance Space Power Technology 

In the pursuit of ambitious space exploration, NASA’s technology roadmap underscores the critical need for advancements in power and energy storage. Driven by the imperative to support extended missions to Mars and beyond, NASA’s objectives demand cutting-edge solutions. The threat of radiation-induced failures in power semiconductor devices poses a significant challenge. In an interview with EE Times, CoolCAD Electronics co-founder and CTO Akin Akturk stressed this issue, noting the importance of robust technologies to withstand space radiation hazards. CoolCAD is pioneering the development of semiconductor devices based on silicon carbide (SiC), engineered for resilience in extreme environments.

Source: SiC Innovations Advance Space Power Technology – EE Times

SENIS Current Sensor for High Speed and High Accuracy Apps

The SENIS® SENCS1D02 is a programmable current sensor that uses a combination of linear Hall sensor and Coil to increase the measurement bandwidth and to improve the signal-to-noise ratio, i.e. to increase resolution. This combination allows the highest frequency bandwidth of this kind of sensor on the market. The sensor provides and analog output voltage proportional to the applied magnetic field density. The transfer characteristic of the sensor is factory trimmed over temperature and is programmable (offset, sensitivity, filtering…) during end-of-line customer calibration beyond
the default factory trimming. In a typical current sensing application, the sensor is used in a combination with a ring shaped soft ferromagnetic core. This core is recommended to be ferrite or laminated for high bandwidth applications.

MTG will be stocking both the SENCS1D02 Current Sensor ICs as well as the application’s specific evaluation boards and kits.  We will maintain inventory on the 10mT and 100mT ranges with X and Z sensitivity. Contact us for more details.

Broadcom SiPM Evaluation PCBs in Stock

Electroverge® now has stock on Broadcom’s AFBR-S4PEPCBDC DC readout evaluation PCB. This kit supports fast testing our Broadcom’s SiPMs and is compatible with Thorlabs cage mount systems SM1 for easy mounting and alignment into optical systems.  Included in our stocking package are the following SiPMs on interposer PCB: AFBR-S4N22P014M (2 mm X 2 mm), AFBR-S4N44P014M (4 mm X 4 mm), and AFBR-S4N66P014M (6 mm X 6 mm).  Features include DC Readout over 50Ω load resistor, Compatible with ThorLabs SM1 cage mounting system, and Carrier PCB is compatible with ABFR-S4E001 evaluation kit. Available SiPM on interposer PCB for multiple parts. Kit available only for evaluation purposes. > Order Now

Source: Electroverge

Micro Two-Axis Two-Mirror System Uses Piezo Smart Stages

The new DK-M3-RS-U2-2M-20-L Developer’s Kit features two M3-RS-U2 Rotary Smart Stages with built-in controllers. It is ideal for precise, point-to-point beam steering in a limited space, with dynamic positioning up to 100 Hz. The 3.3 VDC input makes it suited for handheld/portable instruments. The kit includes two Smart Stages mounted in a base, two mirrors, a 650nm laser, a demo board and cables for evaluation and PC connection, and New Scale’s powerful Pathway Software for development.

Source: NEW Beam Steering Dev Kit: Micro Two-Axis Two-Mirror System Uses Piezo Smart Stages

Senis AG signs MTG to promote Magnetic Position Sensors

SENIS AG, Switzerland is a leading company that provides smart and accurate sensors and instruments for magnetic field and electric current measurements has engaged with Micro Technology Group to promote its magnetic position sensors in the US market.  SENIS® is ISO 9001 and ISO 22301 (Business Continuity Management) certified. Our calibration laboratory is ISO17025:2017 accredited.

Source: Company – Senis AG

VIDEO: M3-RS-U2-4.5-360 Rotary Microstage Developer’s Kit 

Rotary micropositioning stage is only 12 mm diameter including embedded controller. It offers 360 degrees continuous rotation at up to 1,100 degrees/second with an accuracy of 0.25 degrees.

Source: VIDEO: M3-RS-U2-4.5-360 Rotary Microstage Developer’s Kit – New Scale Technologies

New Scale offers rotary microstage with smallest system size and fastest integration 

New Scale Technologies, Inc. today announced its M3-RS-U2-4.5-360 Rotary Smart Stage, a miniature positioning module that simplifies the task of embedding high-precision rotary motion into scientific and industrial instruments. The latest addition to the M3 Smart Stage family features lower cost for high-volume production. It provides point-to-point angular positioning with closed-loop resolution better than 0.022 degrees and bandwidth of ~100 Hz.

Source: New rotary microstage delivers smallest system size and fastest integration for precision embedded motion in smaller, more powerful instruments – New Scale Technologies

Panthronics Introduces Single-Chip Solution for NFC Wireless Battery Charging

Panthronics AG has released the industry’s first integrated, single-chip solution for the listener circuit in NFC wireless charging systems. The PTX30W is an integrated solution that is easier to implement than a circuit made of multiple discrete components. The fully autonomous chipset runs an NFC Forum-derived wireless charging protocol that supports power negotiation. This means that the PTX30W can operate in stand-alone mode with no need for an external microcontroller to run NFC wireless charging operations.

Source: Panthronics Introduces Single-Chip Solution for NFC Wireless Battery Charging